PILTISMART ADD DEVICE

STEP 1 The LOGIN Page will be displayed once you open the App, where you can proceed to LOGIN or create a new LOGIN by clicking register

STEP 2 Enter your EmailID & Password then click LOGIN button. (If you are an existing user)

STEP 3 Click the Plus Icon to Add New Device.

STEP 4 You can add a device either by Scanning the QR Code or by manually entering the device MAC Id.

STEP 5 Next Click the Verify device button.

STEP 6 If you have entered the wrong MAC Id or If you used an unregistered device it will display "DEVICE NOT FOUND" check the MAC Id, incase the MAC ID isn't wrong, contact the Pilti-Smart personnel ASAP

STEP 6a On scanning the QR code or the entering the Serial number of a registered device, an add device tab will be pop-up showing the device profile if the device profile is then correct click the "next button" visible in the pop-up tab, incase of wrong device profile contact Pilti-Smart personnel

STEP 7 Provide a name to your Registered Device of your Desire.

STEP 8 Atlast a Confirmation message will be displayed informing that Device creation is successful.

STEP 9 Device Registry will be Updated automatically.

STEP 10 You can send your WIFI detailes via two different options available A brief guidance about those options are provided right below After following the essential procedure, Click the push to device tab available

STEP 11 Enter your WIFI-SSID (wifi name) and PASSWORD and Select smart-config option available below If the device is available in the smart-config mode or put the physical device in smart config mode (yellow light blinks rapidly)

STEP 12 Enter your WIFI-SSID (wifi name) and PASSWORD and Select Soft-AP option available below If the device is available in the Soft-AP or put the physical device in Soft-AP mode (red light blinks rapidly)

STEP 13 If WIFI isn't readily available, you can setup the device by clicking the skip button to avoid entering WIFI detailes

STEP 14 You are redirected to finishing setup after carrying out the above procedure Click the completed button displayed to get started with your device

STEP 15 Move to the home page, the instructions to check the newly added device is given below.

STEP 16 Click the unassigned tab displayed in the side-panel.

STEP 17 The newly added device will be displayed.

STEP 18 Similarly you can check the newly added device through dashboard as well, Click the menu button.

STEP 19 Select device relationship tree.

STEP 20 You can notice newly added device under unassigned section.

STEP 21 Click on the newly created device.

STEP 22 you can find several options in the side panel. namely "TELEMETRY", "ATTRIBUTES" AND "DEVICE ACTION" Latest Telemetry displays Real-time telemetry entries.

STEP 23 History telemetry displays last recent telemetry entries.

STEP 24 You also have attributes option in the side panel, Attributes accounts details such as device MAC Id, device creatin date and other essential details such as server details, shared attributes.

STEP 25 Device actions allows you user to "restart the device remotely" and also " an option to remove the device from the dashboard if you wish to configure it for someother purpose"